Specify the fire test standard or certification method, if applicable.
Specify the required fire performance level or target rating, even if no formal standard is defined. If no classification is available, describe the expected performance level in words. For example B-s1,d0 or non-flammable surface layer.
Specify any additional fire-related performance requirements not covered by classification. For example: low smoke generation, no flaming droplets allowed etc.
Thank you for filling this out! You can submit the form now based on this initial information, or continue to provide more details about your project. Providing additional information is optional, but it allows us to give more specific and technically accurate feedback.
You cannot save the form and continue later, so please Submit, if you run out of time. You can provide the missing information later.
Describe the product or component where the coating will be used, for example bridges; façade panels; train interiors; deck structures; composite parts etc.
Is this a completely new solution or intended to replace an existing one?
Please describe the current material, coating, or system used.
Is this a one-time project or an ongoing production requirement?
For a one-time project, please indicate the total surface area to be coated. For contiuous production, please indicate the annual coated surface area.
Current development stage of your project.
Main substrate material.
Indicate if gelcoat layer exists or is preferred.
Any additional information about the substrate that may affect coating performance or compatibility, for example substrate thickness and density, treatment with primer, anodized etc, porosity or surface roughness.
Who will apply the coating.
Can you provide a representative test panel?
Will the material be treated after fire protection application? If yes, please let us know how.
Is visual quality critical?
Is light sanding acceptable before coating?
Is a specific colour required for your application?
Provide RAL or other colour reference.
Any additional technical requirements for example anti-graffiti, chemical resistance etc.
+ Add file
Upload drawings, datasheets or certification requirements, if available. (Max 5 MB. Supported file formats: pdf, doc, docx, xls, xlsx, gif, jpg, jpeg, png)